I decided to try my hand at building my own version of McCree’s belt buckle from Overwatch! I used references from the game in order to create a comprehensive digital model which I then 3D printed, smoothed, molded, cast, mounted to a buckle blank, painted, and weathered. Start to finish (and with lots of breaks in-between!), this entire process took me a little over three years to complete.
Using a Nerf Hammershot and an Arduino, I built my own custom video game controller for the character of McCree in Overwatch. Overview The Arduino inside of the Nerf gun acts as a mouse and keyboard, sending HID commands over USB to the computer. The trigger and hammer are wired to Read more…
The goal of this project is to build my own personal replica of the DeLorean’s “Time Circuits”, as featured in the Back to the Future movie trilogy. I’ll need to build custom time circuit displays, a custom keypad for changing the date, and screen-accurate enclosures. To make everything function, I’ll need to design and program some embedded circuits to control it all.
Note: This project is current a work in progress. This page is likely to change as I progress. Overview The goal of this project is to build a set of “musical” floppy disk drives. That is, to be able to use a floppy disk drive as an instrument that plays Read more…
Overview The goal of this project is to build a dynamic backlight, also known as an ‘ambilight’, for my PC monitor. An ambilight changes colors based on the content onscreen, extending your monitor to the wall behind it. By reducing the contrast between the monitor and the background it can Read more…